d
When "Do you want to use the currently projected image as the
User Pattern?" is displayed, select Yes.
e
When you press the [Enter] button, the message "Do you save this
image as the User Pattern?" is displayed. Then, select Yes.
The image is saved. After the image has been saved, the message
"The User Pattern setting is complete". is displayed.
a
• Once a User Pattern has been saved, User Pattern cannot be
returned to the factory default.
• Saving the User Pattern may take approximately 15 seconds.
Do not operate the projector or any connected equipment
while it is saving, otherwise malfunctions may occur.
Projection Functions
64
To Next Page
Loading...
Need help?
General
