Security menu (EB-X21/EB-S21/EB-X17/EB-S17 only)
Available when the Wireless LAN unit is installed.
Submenu Function
Security
Select the security type from the items that are displayed.
When setting up Security, follow the instructions from the
administrator of the network system you are about to access.
WEP Encryption
You can set the encryption for WEP encryption.
128Bit: Uses 128 (104) bit encoding.
64Bit: Uses 64 (40) bit encoding.
Format
You can set the input method for the WEP encryption key.
ASCII: Input text.
HEX: Input in HEX (hexadecimal).
Key ID
Selects the WEP encryption ID key.
Submenu Function
Encryption Key
1/Encryption Key
2/Encryption Key
3/Encryption Key
4
You can enter the key used for WEP encryption. Enter the key in
single-byte characters following instructions from the network
administrator for the network in which the projector
participates. The type of character and the number that can be
entered differ according to the WEP Encryption and Format
settings.
128Bit - ASCII: Single-byte alphanumeric, 13 characters.
64Bit - ASCII: Single-byte alphanumeric, 5 characters.
128Bit - HEX: 0 to 9 and A to F, 26 characters
64Bit - HEX: 0 to 9 and A to F, 10 characters
Authentication
Type
Set the WEP authentication type.
Open: Uses open system authentication.
Shared: Uses shared key authentication.
Passphrase
Enter the passphrase. You can enter at least 8 and up to 63 single-
byte alphanumeric characters.
When using it with EasyMP Network Projection, you do not
need to input the passphrase in the computer if it is the initial
(default) passphrase.
In the interests of security, we recommended that you change the
passphrase periodically. If the network settings are initialized, it
returns to the initial passphrase.
s "Reset menu" p.99
You can enter up to 32 characters on the Configuration menu.
When entering more than 32 characters, use your Web browser
to enter the text.
s "Changing Settings Using a Web Browser (Web Control)"
p.70
In Quick mode, the initial passphrase is set.
Type of security
When the Wireless LAN unit is installed and you are using Advanced, it is
strongly recommended that you set security. Select one of the following
security methods.
List of Functions
95
To Next Page
Loading...
Need help?
General
