Epson EcoTank ET-1110 Series - Ink Bottle Handling Precautions

For Australia and New Zealand
BK: Black C: Cyan M: Magenta Y: Yellow
522 522 522 522
For China
BK: Black C: Cyan M: Magenta Y: Yellow
004 004 004 004
For Asian countries except for China
BK: Black C: Cyan M: Magenta Y: Yellow
003 003 003 003
Related Information
& “Technical Support Web Site” on page 90
Ink Bottle Handling Precautions
Read the following instructions before
relling
ink.
Storing precautions for ink
❏ Keep the ink bottles out of direct sunlight.
❏ Do not store the ink bottles in high or freezing temperatures.
❏ Aer bringing an ink bottle inside from a cold storage site, allow it to warm up at room temperature for at least
three hours before using it.
❏ Epson recommends using the ink bottle before the date printed on the package.
❏ Do not open the ink bottle package until you are ready to ll the ink tank. e ink bottle is vacuum packed to
maintain its reliability. If you leave an ink bottle unpacked for a long time before using it, normal printing may
not be possible.
❏ Once you open an ink bottle, we recommend using it as soon as possible.
❏ When storing or transporting an ink bottle, do not tilt the bottle and do not subject it to impacts or temperature
changes. Otherwise, ink may leak even if the cap on the ink bottle is tightened securely. Be sure to keep the ink
bottle upright when tightening the cap, and take precautions to prevent ink from leaking when transporting the
bottle, for example, putting the bottle in a bag.
Handling precautions for
relling
ink
❏ Use ink bottles with the correct part code for this printer.
❏ e ink for this printer must be handled carefully. Ink may splatter when the ink tanks are lled or relled with
ink. If ink gets on your clothes or belongings, it may not come o.
❏ Do not shake too vigorously or squeeze the ink bottles.
User's Guide
Relling Ink
49