Epson EcoTank ET-1110 Series - Printout Problems

Printout Problems
Printout is Scued or Color is Missing
❏ If you have not used the printer for a long time, the print head nozzles may be clogged and ink drops may not
be discharged. Perform a nozzle check, and then clean the print head if any of the print head nozzles are
clogged.
❏ If you printed when the ink levels were too low to be seen in the ink tank windows, rell the ink tanks to the
upper lines and then use the Power Cleaning utility to replace the ink inside the ink tubes.
Aer
you use the
utility, perform a nozzle check to see if print quality has improved.
Related Information
& “Checking and Cleaning the Print Head” on page 54
& “
Relling
the Ink Tanks” on page 50
& “Running Power Cleaning” on page 56
Banding or Unexpected Colors Appear
e print head nozzles may be clogged. Perform a nozzle check to check if the print head nozzles are clogged.
Clean the print head if any of the print head nozzles are clogged.
Related Information
& “Checking and Cleaning the Print Head” on page 54
Colored Banding Appears at Intervals of Approximately 2.5 cm
User's Guide
Solving Problems
76