Epson EcoTank ET-2550 - Copying

Copying
1. Load paper in the printer.
c
Important:
Make the paper settings on the control panel.
2. Place the originals.
3. Enter Copy from the home screen using the
l or r button, and then press the OK button.
4. Set the number of copies using the
u or d button.
5. Select color copy or monochrome copy using the
l or r button.
6. Press the OK button to display and check the print settings. To change the settings, press the
d button, select
the setting items using the
u or d button and change settings using the l or r button. When you have
nished, press the OK button.
Note:
If you want to copy by reducing or enlarging the size of a document by a specic percentage, select any item other than
Auto Fit as the Reduce/Enlarge setting, and then press the OK button. Specify a percentage in Custom Size. You can
change the percentage in increments of 10% by holding down the
l or r button.
7. Press the x button.
Related Information
& “Copy Mode” on page 16
& “Loading Paper in the Rear Paper Feed” on page 22
&
“Placing Originals on the Scanner Glass” on page 26
User's Guide
Copying
52