Epson EcoTank ET-2550 - Aligning the Print Head - Control Panel; Aligning the Print Head - Windows

Aligning the Print Head - Control Panel
1. Load A4-size plain paper in the printer.
2.
Enter Setup from the home screen using the
l or r button, and then press the OK button.
3. Select Maintenance using the
l or r button, and then press the OK button.
4. Select Head Alignment using the
l or r button, and then press the OK button.
5. Follow the on-screen instructions to print the alignment pattern.
6.
Follow the on-screen instructions to align the print head. Find and select the number for the most solid
pattern in each group using the
u or d button, and then press the OK button.
Note:
❏ e test pattern may vary by model.
❏ If print quality is not improved, align the print head from a computer.
Related Information
& “Loading Paper in the Rear Paper Feed” on page 22
Aligning the Print Head - Windows
1. Load A4-size plain paper in the printer.
2. Access the printer driver window.
3. Click Print Head Alignment on the Maintenance tab.
4.
Follow the on-screen instructions.
Related Information
& “Loading Paper in the Rear Paper Feed” on page 22
& “Windows Printer Driver” on page 76
User's Guide
Improving Print and Scan Quality
71