Epson EcoTank ET-2550 - Refilling the Ink Tanks

❏ Although the ink bottles may contain recycled materials, this does not aect printer function or performance.
❏
Specications
and appearance of the ink bottle are subject to change without prior notice for improvement.
❏ Quoted yields may vary depending on the images that you are printing, the paper type that you are using, the
frequency of your prints and environmental conditions such as temperature.
Ink consumption
❏ To maintain optimum print head performance, some ink is consumed from all ink tanks not only during
printing but also during maintenance operation such as print head cleaning.
❏ When printing in monochrome or grayscale, color inks instead of black ink may be used depending on the
paper type or print quality settings. is is because a mixture of color inks is used to create black.
❏
e
ink in the ink bottles supplied with your printer is partly used during initial setup. In order to produce high
quality printouts, the print head in your printer will be fully charged with ink. is one-o process consumes a
quantity of ink and therefore these bottles may print fewer pages compared to subsequent ink bottles.
Relling the Ink Tanks
1. Enter Setup from the home screen using the l or r button, and then press the OK button.
2. Select Maintenance using the
l or r button, and then press the OK button.
3. Select Reset Ink Levels using the
l or r button, and then press the OK button.
4.
Press the
x button.
5. Open the ink tank unit cover, and then remove the cap of the ink tank.
Aer
removing the cap, place it as
shown in the illustration below.
User's Guide
Relling Ink
64