❏ Adjust the margin setting in the application so that it falls within the printable area.
Related Information
& “Loading Paper in the Rear Paper Feed” on page 22
& “Placing Originals on the Scanner Glass” on page 26
& “Cleaning the Scanner Glass” on page 72
& “Printable Area” on page 103
Paper Is Smeared or Scued
Check the following if the paper is smeared or scued when printing.
❏ Clean the paper path.
❏ Clean the scanner glass and the document cover.
❏ Load paper in the correct direction.
❏ When performing manual 2-sided printing, make sure that the ink is completely dry before reloading the paper.
❏ When the paper is smeared during copying, lower the copy density setting on the control panel.
Related Information
& “Cleaning the Paper Path for Ink Smears” on page 72
& “Cleaning the Scanner Glass” on page 72
& “Loading Paper in the Rear Paper Feed” on page 22
& “Copy Mode” on page 16
& “Print Quality Is Poor” on page 94
Printed Characters Are Incorrect or Garbled
❏ Connect the USB cable securely to the printer and the computer.
❏ Cancel any paused print jobs.
❏ Do not put the computer manually into the Hibernate mode or the Sleep mode while printing. Pages of garbled
text may be printed next time you start the computer.
Related Information
& “Canceling Printing” on page 51
The Printed Image Is Inverted
Clear any mirror image settings in the printer driver or the application.
❏ Wi n d o w s
Clear Mirror Image on the printer driver's More Options tab.
❏ Mac OS X
Clear Mirror Image from the print dialog's Print Settings menu.
User's Guide
Solving Problems
96
To Next Page
Loading...
