Improving Print and Scan Quality
Checking and Cleaning the Print Head
If the nozzles are clogged, the printouts become faint, there is visible banding, or unexpected colors appear. When
print quality has declined, use the nozzle check feature and check if the nozzles are clogged. If the nozzles are
clogged, clean the print head.
c
Important:
Do not open the scanner unit or turn o the printer during head cleaning. If the head cleaning is incomplete, you
may not be able to print.
Note:
❏ Because print head cleaning uses some ink, clean the print head only if quality declines.
❏ When ink is low, you may not be able to clean the print head. Prepare a new ink bottle.
❏ If print quality has not improved aer repeating nozzle check and head cleaning three times, wait for at least 12 hours
without printing, and then run the nozzle check again and repeat the head cleaning if necessary. We recommend to turn
o the printer. If print quality has still not improved, contact Epson support.
❏ To prevent the print head from drying out, do not unplug the printer while the power is on.
❏ To keep the print head operating at its best, we recommend printing a few pages on a regular basis.
Checking and Cleaning the Print Head - Control Panel
1. Load A4-size plain paper in the printer.
2. Enter Setup from the home screen using the
l
or
r
button, and then press the OK button.
3. Select Maintenance using the
l
or
r
button, and then press the OK button.
4. Select Nozzle Check using the
l
or
r
button, and then press the OK button.
5. Follow the on-screen instructions to print the nozzle check pattern.
6.
Compare the printed check pattern with the sample shown below.
❏ All lines are printed:
e
print head nozzles are not clogged. Select No using the
u
or
d
button and press
the OK button.
User's Guide
Improving Print and Scan Quality
68
To Next Page
Loading...
