Epson EH-TW420 - Setting Auto Iris; Changing Color Mode with the Configuration Menu

Functions for Enhancing Projection
16
f Changing color mode with the configuration menu
A
Press the [Menu] button and select "Image" - "Color
Mode" in the configuration menu.
s p.30
B
Select a Color Mode name.
C
Press the [Menu] button to close the configuration
menu.
Setting Auto Iris
By automatically setting the luminance according to the brightness of the
displayed image, it lets you enjoy deep and rich images.
A
Press the [Menu] button and select "Image" - "Auto
Iris" in the configuration menu.
s p.30
B
Select "On".
The set value is stored for each color mode.
Procedure
Using the remote control
Using the control panel
Procedure
Using the remote control
Using the control panel