Epson EH-TW7000 User Manual

Preparing
22
g
Use the up and down buttons to select the Bluetooth device you want to connect to, and
then press the [Enter] button to connect.
The next time you turn on the projector, it automatically connects to the last device it connected to.
To change the connected device, repeat the procedure from step 5.
Bluetooth specifications
Version
Bluetooth Ver. 3.0
Output
Class 2
Communication dis-
tance
Approx. 10 m
Supported profiles
A2DP
Content protection
SCMS-T
Frequency used
2.4 GHz band (2.402 to 2.480 GHz)
Supported codecs
SBC, Qualcomm
®
aptX
™
audio
Warning
•
Electromagnetic interference may cause medical equipment to malfunction. Before using the device, make
sure there is no medical equipment in the vicinity.
•
Electromagnetic interference may cause automatically controlled equipment to malfunction which could
cause an accident. Do not use the device near automatically controlled equipment such as automatic doors
or fire alarms.
c
•
Connect a Bluetooth device that supports copyright protection (SCMS-T).
•
You may not be able to connect depending on the standard and type of device.
•
Even when connecting within the specified communication distance, connections can be lost due to
the status of the signal.
•
The communication method for Bluetooth uses the same frequency (2.4 GHz) as wireless LAN
(IEEE802.11b/g) or microwave ovens. Therefore, if these devices are used at the same time, radio wave
interference may occur, the image and audio may be interrupted, or communication may not be
possible. If you do need to use these devices at the same time, make sure there is enough distance
between them and the Bluetooth device.
•
You cannot connect multiple Bluetooth devices to the projector at the same time.
•
There is a delay in the audio output from any Bluetooth audio devices.

Epson EH-TW7000 Specifications

General

Matrix size	0.61 \
Number of colors	1.07 billion colors
Native aspect ratio	16:9
Projection distance	2.95 - 4.77 m
Vertical scan range	192 - 240 Hz
Projection technology	3LCD
Contrast ratio (typical)	40000:1
Screen size compatibility	40 - 500 \
Projector native resolution	2160p (3840x2160)
Keystone correction, horizontal	-30 - 30 °
Noise level	32 dB
Country of origin	Philippines
2D/3D frequency image	240/480 Hz
Noise level (economic mode)	24 dB
Built-in speaker(s)	No
Lamp type	UHE
Lamp power	250 W
Light source type	Lamp
Service life of light source	3500 h
Service life of light source (economic mode)	5000 h
Focus	Manual
Throw ratio	1.32 - 2.15:1
Zoom capability	Yes
Focal length range	18.2 - 29.2 mm
Aperture range (F-F)	1.49 - 1.77
Vertical lens shift range	-60 - 60 %
Horizontal lens shift range	-24 - 24 %
Placement	Ceiling, Desktop
Product type	Standard throw projector
Product color	White
Market positioning	Home cinema
Cable lock slot type	Kensington
Video processing	10 bit
Video color modes	Auto, Cinema, Dynamic, Natural, Bright cinema
Supported 3D formats	Side by side, Top and bottom
Supported video modes	2160p
Supported 3D technologies	Samsung Active 3D
Analog signal format system	-
Supported graphics resolutions	3840 x 2160
Power source	AC
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	368 W
Power consumption (PowerSave)	280 W
Serial interface type	RS-232C
USB 2.0 ports quantity	2
VGA (D-Sub) ports quantity	0
Mini-USB 2.0 ports quantity	1
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	5 - 30 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 80 %
Pallet weight	0 g
Quantity per pack	1 pc(s)
Quantity per pallet	18 pc(s)
Quantity per pallet (UK)	36 pc(s)
Quantity per pallet layer	2 pc(s)
Harmonized System (HS) code	85286200
Quantity per pallet layer (UK)	4 pc(s)

Weight and Dimensions

Depth	310 mm
Width	410 mm
Height	157 mm
Weight	6600 g
Package depth	495 mm
Package height	230 mm
Package weight	8710 g