EasyManuals Logo
Home>Epson>Projector>EH-TW7000

Epson EH-TW7000 User Manual

Epson EH-TW7000
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #86 background imageLoading...
Page #86 background image
Maintenance
85
d
Hold the air filter with the surface
facing down and tap it 4 or 5 times to
remove the dust.
Turn it over and tap the other side in the
same way.
Attention
If the air filter is hit too hard, it may
become unusable due to deformities
and cracks.
e
Remove any dust remaining on the air
filter by using a vacuum cleaner from
the front side.
f
Install the air filter.
Grip the air filter by the knob in the center
and insert it straight.
g
Install the air filter cover.
Fasten the upper catch and then the lower
one.
Cleaning the main unit
Before cleaning, make sure you unplug the charging adapter from the outlet.
Clean the projector's surface by wiping it gently with a soft cloth.
If it is particularly dirty, use a piece of well-wrung cloth moistened with water and wipe the surface again with
a dry cloth.
Attention
Do not use detergent for kitchen or volatile substances such as wax, benzine and thinner to clean the
projector's surface. The quality of the outer case may change or the paint may peel off.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EH-TW7000 and is the answer not in the manual?

Epson EH-TW7000 Specifications

General IconGeneral
Matrix size0.61 \
Number of colors1.07 billion colors
Native aspect ratio16:9
Projection distance2.95 - 4.77 m
Vertical scan range192 - 240 Hz
Projection technology3LCD
Contrast ratio (typical)40000:1
Screen size compatibility40 - 500 \
Projector native resolution2160p (3840x2160)
Keystone correction, horizontal-30 - 30 °
Noise level32 dB
Country of originPhilippines
2D/3D frequency image240/480 Hz
Noise level (economic mode)24 dB
Built-in speaker(s)No
Lamp typeUHE
Lamp power250 W
Light source typeLamp
Service life of light source3500 h
Service life of light source (economic mode)5000 h
FocusManual
Throw ratio1.32 - 2.15:1
Zoom capabilityYes
Focal length range18.2 - 29.2 mm
Aperture range (F-F)1.49 - 1.77
Vertical lens shift range-60 - 60 %
Horizontal lens shift range-24 - 24 %
PlacementCeiling, Desktop
Product typeStandard throw projector
Product colorWhite
Market positioningHome cinema
Cable lock slot typeKensington
Video processing10 bit
Video color modesAuto, Cinema, Dynamic, Natural, Bright cinema
Supported 3D formatsSide by side, Top and bottom
Supported video modes2160p
Supported 3D technologiesSamsung Active 3D
Analog signal format system-
Supported graphics resolutions3840 x 2160
Power sourceAC
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.5 W
Power consumption (typical)368 W
Power consumption (PowerSave)280 W
Serial interface typeRS-232C
USB 2.0 ports quantity2
VGA (D-Sub) ports quantity0
Mini-USB 2.0 ports quantity1
Storage temperature (T-T)-10 - 60 °C
Operating temperature (T-T)5 - 30 °C
Storage relative humidity (H-H)10 - 90 %
Operating relative humidity (H-H)20 - 80 %
Pallet weight0 g
Quantity per pack1 pc(s)
Quantity per pallet18 pc(s)
Quantity per pallet (UK)36 pc(s)
Quantity per pallet layer2 pc(s)
Harmonized System (HS) code85286200
Quantity per pallet layer (UK)4 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth310 mm
Width410 mm
Height157 mm
Weight6600 g
Package depth495 mm
Package height230 mm
Package weight8710 g

Related product manuals