Using the Projector on a Network
52
d
Select Basic, and then set the following as necessary.
•
Projector Name: Enter a name up to 16 alphanumeric characters long to identify the projector over the
network.
•
Remote Password: Set a password to use when you operate the projector from a smartphone or a tablet. You
can enter up to single-byte 8 alphanumeric characters.
•
Display LAN Info.: Set the display format for the projector's network information.
c
Use the displayed keyboard to enter the name, passwords and keyword. Use the up/down/
left/right buttons to select characters, and then press the [Enter] button to confirm the
selection.
e
Select Wireless LAN, and then press the [Enter] button.
f
Select the Connection Mode setting.
•
Quick: Lets you connect the projector to your smartphones, tablets, or computers directly using wireless
communication. When you select Quick, go to step 10.
•
Advanced: Lets you connect to multiple smartphones, tablets, or computers over a wireless network access
point. When you select Advanced, go to step 7.
g
Select Network Configuration - Wireless LAN - Search Access Point, to select the access
point you want to connect to.
c
If you need to assign the SSID manually, select SSID to enter the SSID. In addition, configure
the security settings in the Security menu.
s
p.54
To Next Page
Loading...
