Adjusting the Image
42
Function Explanation
Load Memory
Loads the saved memory. When you select a memory and press the
button, the settings applied to the current image are replaced with the
settings from the memory.
Erase Memory
Erases the registered memory. When you select a memory name and press
the
button, a message is displayed. Select Yes, and then press the
button to erase the selected memory.
Rename Memory
Changes the memory name. Select the memory name you want to
change, and then press the
button. Enter the memory name using
the soft keyboard.
s p.87
When you have finished, move the cursor over Finish, and then press the
button.
Load Lens Position
Loads the registered lens position memory. When you select the lens po-
sition name and press the
button, the adjustment value for the se-
lected lens position memory is applied.
Erase Lens Position
Erases the registered lens position memory. When you select a lens posi-
tion name and press the
button, a message is displayed. Select Yes,
and then press the
button to erase the selected lens position memory.
Rename Lens Position
Changes the lens position memory name. Select the lens position memory
name you want to change, and then press the
button. Enter the lens
position memory name using the soft keyboard.
s p.87
When you have finished, move the cursor over Finish, and then press the
button.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
