What to do if Epson Projector shows High Temp Warning?
If your Epson Projector displays a High Temp Warning, you can continue projecting. However, if the temperature rises excessively again, the projection will stop automatically. Ensure there's at least 20 cm of space between the projector's exhaust vent and any wall if it's installed close to one. Also, check and clean the air filter if it's clogged.
What to do if Epson EH-TW9000W shows Internal Error?
If your Epson Projector is showing an Internal Error, remove the power plug from the electrical outlet.
Explains the functions of the remote control buttons for operating the projector.
Covers the initial setup procedures for the projector, including projection methods.
Guides on connecting external video, computer, and other sources to the projector.
Covers the procedure for turning the projector on and starting projection.
How to display a test pattern for adjustments like zoom and focus.
Using control panel buttons to correct keystone distortion.
Covers fundamental image adjustments like Color Mode and Aspect Ratio.
Fine-tuning image colors by adjusting Hue, Saturation, Brightness, Gamma, and RGB.
Provides methods for diagnosing and fixing projector problems.
To Next Page
General
