Epson EH-TW9000W - Connecting to External Devices; Connecting to the Trigger out Port; Connecting Wirelesshd Devices (EH-TW9000 W Only)

Preparing
20
Connecting to External Devices
Connecting to the Trigger out port
You can connect to external devices such as electric screens with a 3.5 mm mini jack.
When set to on, a signal (12 V DC) is output from this port to communicate the projector's status (on or off)
to connected devices such as electric screens.
c
When using the Trigger out port, set the Trigger Out function. s Extended - Operation - Trigger
Out p.64
Connecting WirelessHD devices (EH-TW9000W only)
The projector receives transmissions from the WirelessHD Transmitter, and projects the images. s p.53
Change the projected image by pressing the
button on the remote control or the button on the
control panel.
c
•
When receiving WirelessHD images, make sure WirelessHD is set to On. s Settings -
WirelessHD p.62
•
You can change which device is displayed by selecting a device from Device Connections in HDMI
Link.
s HDMI Link-Device Connections p.52