Adjusting the Image
38
Setting Auto Iris
By automatically setting the luminance according to the brightness of the displayed image, it lets you enjoy
deep and rich images.
You can select the luminance adjustment tracking for changes in brightness in the displayed image from
Normal to High Speed.
(Depending on the image, you may hear the auto iris operating, but this is not a malfunction.)
a
Press the button.
c
You can make settings from the
configuration menu.
s
Image -
Auto Iris p.57
b
Use the buttons to
select the item, and then press the
button to confirm the selection.
Frame Interpolation
By automatically interpolating an image between one frame and the next you can enjoy a smoother image.
This reduces jarring movements such as frame skipping during fast moving images.
You can select the level of interpolation from Low, Normal, or High. If you notice any distortion and so on
after changing the setting, set it to Off.
a
Press the button.
c
You can make settings from the
configuration menu.
s
Signal -
Frame Interpolation p.59
b
Use the buttons to
select the item, and then press the
button to confirm the selection.
To Next Page
Loading...
Need help?
General
