Using the Projector on a Network
67
Projecting Using Wired LAN
You can send images to your projector through a wired network.
To do this, connect the projector to your network, and then set up your projector and computer for network
projection.
When using EasyMP Multi PC Projection, you can display up to four separate screens from the projector from
up to 50 computers connected to the network.
Download EasyMP Multi PC Projection from the following Web site.
http://www.epson.com
Selecting Wired Network Settings
Before you can project from computers on your network, you need to select network settings on the projector.
c
Before making settings, connect a LAN cable to the LAN port, and connect the projector to the wired
LAN.
a
Press the button to display menus in the order Network - Network Configuration.
b
Select Basic, and then set the following as necessary.
•
Projector Name: Enter a name up to 16 alphanumeric characters long to identify the projector over the
network.
•
PJLink Password: Set a password to use when you control the projector using compatible PJLink software.
You can enter up to 32 single-byte alphanumeric characters.
•
Remote Password: Set a password to use when you operate the projector from a smartphone or a tablet. You
can enter up to 8 single-byte alphanumeric characters.
•
Display LAN Info.: Set the display format for the projector's network information.
c
Use the displayed keyboard to enter the name, passwords and keyword. Press the
buttons on the remote control to highlight characters, and then press the
button to enter them.
c
Select Wired LAN, and then press the button.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
