EasyManuals Logo

Epson EH-TW9300 User Manual

Epson EH-TW9300
134 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #93 background imageLoading...
Page #93 background image
Troubleshooting
92
Problem Solving
Reading the Indicators
You can check the status of the projector from the flashing and lit , (operation indicator),
o
and
m
on
the control panel.
Refer to the following table to check the projector's status and how to remedy problems shown by the
indicators.
Indicator status during an error/warning
: Lit : Flashing : Status maintained : Off
Indicators Status Remedy
(blue)/(orange)
Replace Lamp
It is time to replace your lamp. Replace the lamp with a new
lamp as soon as possible.
s p.109
The lamp may explode if you continue to use it in this status.
(blue)/(orange)
High Temp Warning
You can continue projecting. If the temperature rises too high
again, projection stops automatically.
If the projector is installed next to a wall, make sure there is at
least 20 cm between the wall and the projector's exhaust vent.
If the air filter is clogged, clean it. s p.105

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EH-TW9300 and is the answer not in the manual?

Epson EH-TW9300 Specifications

General IconGeneral
Number of colors1.073 billion colors
Native aspect ratio16:9
Projection distance3 - 6.3 m
Projection technology3LCD
Contrast ratio (typical)1000000:1
Screen size compatibility50 - 300 \
Projector native resolution1080p (1920x1080)
Keystone correction, vertical± 30 °
Built-in displayYes
Display diagonal0.74 \
Lamp power250 W
Light source typeLamp
Service life of light source3500 h
Service life of light source (economic mode)5000 h
Noise level24 dB
Country of originChina
2D/3D frequency image240/480 Hz
Noise level (economic mode)20 dB
FocusAuto
Throw ratio1.35 - 2.84:1
Focal length range22.5 - 46.7 mm
Composite video in-
Serial interface typeRS-232C
USB 2.0 ports quantity1
Ethernet LAN data rates10, 100, 1000 Mbit/s
PlacementDesktop
Product typeStandard throw projector
Product colorBlack
Market positioningHome cinema
Cable lock slot typeKensington
Color modes (2D)Bright cinema, Cinema, Dynamic, Natural
Color modes (3D)Cinema, Dynamic
Video processing10 bit
Supported 3D formatsSide by side, Top and bottom
Power sourceAC
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.35 W
Power consumption (typical)335 W
Power consumption (PowerSave)270 W
Storage temperature (T-T)-10 - 60 °C
Operating temperature (T-T)5 - 35 °C
Storage relative humidity (H-H)10 - 90 %
Cables includedHDMI
Bundled softwareEasyMP Multi PC Projection
Handheld remote controlNo
Pallet width800 mm
Pallet height4630 mm
Pallet length1200 mm
Pallet width (UK)1000 mm
Quantity per pack1 pc(s)
Quantity per pallet16 pc(s)
Quantity per pallet layer2 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth450 mm
Width520 mm
Height170 mm
Weight11000 g
Package depth660 mm
Package width515 mm
Package height260 mm
Package weight14330 g

Related product manuals