Connect the document camera to the projector with a cable before turning
on the document camera.
s "Connecting" p.17
a
Connect the power cord as shown and plug the cord into a wall
outlet.
b
Press the [t] power button on the document camera or remote
control.
The power indicator flashes blue. When startup is complete, the
power indicator and the camera indicator are lit blue. Startup takes
approximately 15 seconds.
c
Turn on your projector.
d
Select the appropriate source on the projector depending on the
port to which you connected.
Live images from the document camera are projected from the
projector.
Plugging In and Turning On
23
To Next Page
Loading...
