■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■ ■ ■ ■ ■
1
1
Installation
This chapter describes how to unpack and set up your
projector, and connect it to other equipment. The projector
must be connected to a computer or a video source such as a
video tape deck, camcorder, digital camera or laser disk player
before it can project any images.
You may also what to set up the projector for one or more of
the following:
• Connect the mouse cable to use the remote control as a
wireless mouse.
• Connect the projector to an audio source for one or both
image sources. The audio source can be the computer,
video source, or another device such as a stereo.
• Connect the projector to an external speaker or PA system
to amplify the audio.
To Next Page
Loading...
