■ ■ ■ ■
12
Connecting to a Macintosh desktop
computer
Before beginning, turn off the projector and computer if they
are on.
1. Connect the computer cables.
♦
Note:
Macintosh computer configurations vary. See your
computer manual for the location of the ports needed to connect
your projector.
* You may need adapters that came with your computer or
purchased from your computer dealer for connecting.
a. Connect either end of the computer cable to the
projector’s Computer In port.
b. Connect the other end of the computer cable to the
monitor or video port where monitor cable is
disconnected from the computer.
c. If necessary, connect the monitor cable to the
projector’s Computer out.
Monitor cable
Computer cable
* Mac
desktop
adapter
Mac monitor
adapter
* Video
cable
adapter
To Next Page
Loading...
