What to do if the power indicator light is red on my Epson Projector?
- NnewtonangelaOct 26, 2025
If the power indicator light on your Epson Projector is red, it could indicate several issues. It might be due to an internal error, a fan error sensor error, a high temperature error (overheating), or a lamp error (failure or open lamp cover). For internal or fan error, stop using the projector, disconnect the power, and contact your dealer. For overheating, let the projector cool down for five minutes, then check the air filter and exhaust vent. Clean or replace the filter if needed, ensuring the projector isn't against a wall. For lamp issues, inspect the lamp for cracks. If intact, refit it. If the error persists, replace the lamp. Also, verify the lamp cover and the lamp are securely installed. If problems continue after these steps, stop using the projector, disconnect the power, and...









