List of Functions
29
Extended Menu
Sub Menu Function
Display You can make settings related to the projector's display.
Messages: You can set whether to display (On) or not display (Off) the source name when you change the input source, the color mode name
when you change the Color Mode, a message when no image signal is input, and so on.
Display Background
*1
: You can set the screen status for when no image signal is available to "Black", "Blue", or "Logo".
Startup Screen
*1
: You can set whether the startup screen (the image projected when starting the projector) is displayed (On) or not (Off).
A/V Mute
*1
: You can set the screen displayed during A/V Mute as "Black", "Blue", or "Logo".
User's Logo
*1
You can change the user's logo that is displayed as a background and displayed during A/V Mute. s p.57
Projection You can choose one of the following settings according to the way the projector is setup. s p.49
Front" "Front/Ceiling" "Rear" "Rear/Ceiling"
You can change the setting as follows by pressing down the [A/V Mute] button on the remote control for about five seconds.
Front" W "Front/Ceiling"
Rear" W "Rear/Ceiling"
For EMP-83/822 For EMP-X5/S5 For EMP-X5/S5 (Euro)
To Next Page
Loading...
