Epson EMP-S3 Setup Guide

3
English
Connecting to Visual Equipment
• Turn off connected
equipment. Damage
may result if you try to
connect when the
power is on.
• Do not try to force a
cable connector to fit a
port with a different
shape. This may
damage your projector.
• When the source has an
unusual connection, use the
cable provided with the
source or commercially
available cables.
• If you use a 2RCA (L/R)
stereo min-jack audio cable,
make sure it is labelled "No
resistance".
Connecting to
a Computer
Component video
cable (optional)
Computer cable
(Accessory /
Optional)
To audio
output port
To audio
output
port
Video
out
S-Video
out
S-Video cable
(Commercially
available)
A/V Cable
(Commercially available)
DVD players, VHS
players, satellite
tuners, RGB
converters, video
distribution
machines, and so on.
* The port names may vary depending on the equipment.
Component
out
Connecting to a
Video Source
Audio Cable
(Commercially
available)
Audio Cable
(Commercially
available)

Epson EMP-S3 Specifications

General

Brightness	1600 ANSI lumens
Resolution	800 x 600 (SVGA)
Contrast Ratio	400:1
Display Technology	3LCD
Screen Size	30 - 300 inches
Lamp Type	170W UHE
Lamp Life	3000 hours (standard), 4000 hours (eco mode)
Projection Lens	Manual focus
Input Ports	VGA, Composite, S-Video
Output Ports	VGA
Operating Temperature	5°C to 35°C