Epson EMP-S1H - User Manual

Adjusting the Image Size
The size of the projected image is determined by the distance from the lens to the screen. The
following values should be used as a guide for setting up the projector.
Connecting to a Computer
Turn off the power for both the projector and the computer before connecting.
Quick Reference Guide
Be sure to read the accompanying
User's Guide before using the projector.
WARNING
Do not look into the lens while the
projector's power is turned on.
p
The computer cable supplied with the projector may not match the monitor port on
some computers. In such cases, you will need to purchase a separate adapter.
s User's Guide
" Projection distance and screen size"
Distance from centre of lens to bottom edge of screen
Screen size
Centre of
lens
* When installing against a wall, leave about 20 cm (7.9in.) between the projector and the wall.
s User's Guide
"Connecting to a Computer"
To computer
monitor port
Computer/Component Video port (blue)
Computer cable
(accessory)

Epson EMP-S1H Specifications

General

Brand	Epson
Model	EMP-S1H
Category	Projector
Language	English

Summary

Adjusting the Image Size

Connecting to a Computer

Connecting to Video Equipment

Quick Start

Adjustments

Adjusting the image angle

Control projector tilt using front and foot buttons for proper display alignment.

Keystone

Corrects trapezoidal distortion when the projector is not perpendicular to the screen.

Adjusting the image size and focus

Fine-tune projection size using Wide/Tele buttons and adjust focus with the ring.

Adjusting the focus

Turn the focus ring to achieve a sharp and clear projected image.

Auto Setup (computer connections)

Automatically adjusts incoming signals for optimal computer image projection.

Other adjustments

Access configuration menu via [Menu] for brightness, contrast, and color settings.

Turning off the Projector

Useful Functions

Color Mode

Select one of five preset color modes (Dynamic, Presentation, Theatre, Living Room, sRGB).

A;V Mute

Pause and resume image and sound playback using the remote control's A/V Mute button.

Troubleshooting

No images appear: No signal

Troubleshoot missing images, often related to selecting external video output on PCs.

Checking the indicators

Interprets power and warning indicator lights to diagnose projector operational status.