37
List of Functions
Operation Direct Power On:
Sets whether direct power on is enabled ("On") or disabled ("Off").
When you set to "On" and leave the power cable connected to a wall socket, be aware of that sudden surges of electricity that may occur when
power comes back on after a power outage may cause the projector to turn on automatically.
Sleep Mode:
Sets whether projection stops automatically ("On") or not ("Off") in the following situations.
- When no image signals are input for approximately 30 minutes.
- When the A/V mute slide is shut and no operations are carried out for approximately 30 minutes.
When set to "Off", the power supply to the unit remains on. Do not forget to switch off the power supply.
When set to "On", after about 30 minutes in A/V Mute the power turns off automatically. At the time of purchase, Sleep Mode is set to "Off".
High Altitude Mode:
When using above an altitude of about 1500m, set to "On".
Link 21L Sets whether communication using a USB connection and the EMP Link 21Lg utility software is being used or not.
To enable the EMP Link 21L, turn the projector's power off and wait until the cool down period has finished. After the USB communication
driver is installed, set to "On" to use it.
Language Sets the language for message displays.
Reset Returns "Display" and "Operation" settings in the "Extended" menu (except for "High Altitude Mode") to their default settings.
If you would like to return all menu items to their default, see "Reset All". sp.39
Sub-menu Function
To Next Page
Loading...
