34
Configuration Menu Functions
"Reset" menu
Using the configuration menus
Displaying a menu
Selecting a menu item
Use or to select a menu item, then press .
Changing settings
Example:
If you press when an item with next to it is selected, the selection screen for that item
will be displayed.
To return to a previous display, press . Alternatively, select [Return] and then press .
When setting is complete
Press .
This resets all configuration menu settings to their default settings. The "Save Memory", "Component",
"D/SCART" and "Language" settings will not be reset. The "Save Memory" is reset by "Reset Memory".
This initialises the lamp operating time. When this command is selected, the cumulative operating time
for the lamp is cleared and returned to the default setting.
Use or to adjust values.
Use or to select an item, then press .
Reset All
Reset Lamp Hours
Full menu: Press . Line menu: Press or .
(green): Current setting value
(orange): Currently-selected item
To Next Page
Loading...
