Epson EP-4004 - Turn Printer State Reply On;Off (Remote Mode) S T 0 2 H 0 0 H 0 0 H M1

2013/Feb/08
Revision: 1 Page: 55
6.1.5. Turn printer state reply on/off (Remote Mode) “ST” 02H 00H 00H m1
[Format]
“ST” 02H 00H 00H m1
[Parameters]
* Parameter m1 is one byte binary parameter, and indicates the setting as follows:
m1 Printer State Reply
10H Binary state reply Off
11H Binary state reply On
[Function]
-Thedefaultenvironmentstatus transmissionis set. Seethe paragraphofstatustransmissionforthestatustransmission.
-Thissettingdependsoninterfacesthatreceivethis command. Forexample, this commandisreceived with thebuilt-in
Macintoshserial interface,thestatustransmissionforthebuilt-inMacintoshserialinterfaceisset.
-Iftheparameter m1 isoutofrange,orifsettingofparameterm1 isnot supported bythe product,thiscommandis
ignored, andthe existingsettingis maintained.
-ThiscommandisonlyavailableinRemoteMode.
Auto interface select function
-Ifthestatus transmissionis ON,theinterface transmitsthestatus whether theinterface is selected ortheinterfaceis
deselected bytheauto interfaceselectfunction.