Epson ET-16500 - Setting the Number of Rings to Answer

153
You see this screen:
8. Select Use.
9. Select Access Code, use the on-screen keypad to enter the code (9 for example), and press .
10. Select OK.
Parent topic: Setting Up Fax Features Using the Product Control Panel
Setting the Number of Rings to Answer
If you connect an external answering machine and select to receive faxes automatically, make sure the
Rings to Answer setting is correct. The number of rings should be higher than the number of rings your
answering machine is set to for answering a call.
Note: This setting can be locked by an administrator. If you cannot access or change this setting,
contact your administrator for assistance.
1. Press the home button, if necessary.
2. Select Setup.
3. Scroll down and select System Administration. Enter the administrator password, if necessary.
4. Scroll down and select Fax Settings.
5. Select Receive Settings.
6. Select Rings to Answer.