162
Setting Options Description
Remote Receive Off Lets you start receiving faxes using your phone
instead of operating the product (if the Receive Mode
is set to Auto). When you enable this function, you
need to set a Start Code. If you are using a cordless
handset whose base is connected to the product, you
can start receiving the fax by entering the code on the
handset.
On
Start Code
Parent topic: Setting Up Fax Features Using the Product Control Panel
Security Settings - Fax
Set the security options you want to use for fax data.
Setting Options Description
Direct Dialing
Restrictions
Off Does not restrict dialing fax numbers
On Allows faxing only to numbers stored in the contacts
list or history
Enter Twice Requires you to enter fax numbers twice to prevent
errors
Confirm Address List Off Selects whether to display a recipient confirmation
screen before a fax is sent
On
Inbox Password
Settings
Register Lets you set a password for viewing incoming faxes
Backup Data Auto Clear Off Automatically erases sent or received fax data
remaining in your product's memory
On
Clear Backup Data — Deletes all sent or received fax data remaining in your
product's memory; run this function if you are giving
away or disposing of your product
Parent topic: Setting Up Fax Features Using the Product Control Panel
To Next Page
Loading...
Need help?
General
