Epson ET-2750 series - Page 105

Note:
If any ink remains in the ink bottle, tighten the cap and store the bottle upright for later use.
11. Close the ink tank cover
rmly.
12. Close the scanner unit, and then press the x button.
13.
Select the color of the ink you
relled
up to the upper line.
14. Press the
x button to reset the ink level.
15. Conrm the message, and then press the OK button.
c
Important:
If you continue to use the printer
aer
resetting the ink level without
relling
the ink tank to the upper line, printing
may be performed without ink and this may damage the printer. Before you start printing, make sure you visually
check the ink levels in all of the ink tanks.
Related Information
& “Ink Bottle Codes” on page 100
& “Ink Bottle Handling Precautions” on page 100
& “Ink Spilled” on page 153
User's Guide
Relling Ink
105