Epson ET-2750 series - Printout is Scuffed or Color is Missing

Cannot Print from an iPhone or iPad
❏ Connect the iPhone or iPad to the same network (SSID) as the printer.
❏ Enable Paper Setup Auto Display in the following menus.
Settings > Printer Setup > Paper Source Settings > Paper Setup Auto Display
❏ Enable the AirPrint setting on Web Cong.
Related Information
& “Connecting to a Smart Device” on page 23
& “Application for Conguring Printer Operations (Web Cong)” on page 115
Printout Problems
Printout is Scued or Color is Missing
❏ If you have not used the printer for a long time, the print head nozzles may be clogged and ink drops may not
be discharged. Perform a nozzle check, and then clean the print head if any of the print head nozzles are
clogged.
❏ If you printed when the ink levels were too low to be seen in the ink tank windows,
rell
the ink tanks to the
upper lines and then use the Power Cleaning utility to replace the ink inside the ink tubes. Aer you use the
utility, perform a nozzle check to see if print quality has improved.
Related Information
& “Checking and Cleaning the Print Head” on page 106
& “Relling the Ink Tanks” on page 101
& “Running Power Cleaning” on page 108
Banding or Unexpected Colors Appear
e print head nozzles may be clogged. Perform a nozzle check to check if the print head nozzles are clogged.
Clean the print head if any of the print head nozzles are clogged.
Related Information
& “Checking and Cleaning the Print Head” on page 106
User's Guide
Solving Problems
139