Epson ET-4700 Series - Aligning the Print Head - Control Panel; Cleaning the Paper Path for Ink Smears; Cleaning the ADF

Aligning the Print Head - Control Panel
1. Select Maintenance on the home screen.
To select an item, use the
u d l r buttons, and then press the OK button.
2. Select Print Head Alignment.
3. Select the adjustment menu you want to adjust to improve the printouts according to the status of the print
results.
❏ Vertical lines look misaligned or the printouts look blurry : Select Vertical Alignment.
❏ Horizontal banding occurs at regular intervals: Select Horizontal Alignment.
4. Follow the on-screen instructions.
Related Information
& “Loading Paper in the Rear Paper Feed” on page 49
Cleaning the Paper Path for Ink Smears
When the printouts are smeared or
scued,
clean the roller inside.
c
Important:
Do not use tissue paper to clean the inside of the printer.
e
print head nozzles may be clogged with lint.
1.
Load A4-size plain paper in the rear paper feed slot.
2. Select Maintenance on the home screen.
To select an item, use the
u d l r buttons, and then press the OK button.
3. Select Paper Guide Cleaning.
4. Follow the on-screen instructions to clean the paper path.
Repeat this procedure until the paper is not smeared with ink.
Related Information
& “Loading Paper in the Rear Paper Feed” on page 49
Cleaning the ADF
When the copied or scanned images from the ADF are smeared or the originals do not feed in the ADF correctly,
clean the ADF.
User's Guide
Maintaining the Printer
151