Epson ET-7750 - Changing or Updating Network Connections

45
2. Press the arrow buttons to select Settings and press the OK button.
3. Select Network Settings and press the OK button.
4. Select Network Status and press the OK button.
You see a screen like this:
Note: If you are connected to a network, the signal strength is also displayed.
5. Press the left or right arrow button to view additional options.
6. Press the up or down arrow buttons to select Print Status Sheet and press the OK button.
7. Press the start button to print the network status sheet.
(Press the cancel button if you want to cancel the operation.)
Examine the settings shown on the network status sheet to diagnose any problems you have.
Parent topic: Wi-Fi or Wired Networking
Changing or Updating Network Connections
See these sections to change or update how your product connects to a network.
Accessing the Web Config Utility
Changing a USB Connection to a Wi-Fi Connection
Changing a Wi-Fi Connection to a Wired Network Connection
Connecting to a New Wi-Fi Router