Epson ET-8700 - Scanning with Document Capture Pro in Simple View

165
4. Select General Settings > Scan Settings > Document Capture Pro.
5. Choose from the following Operation Mode options:
• Select Client Mode if Document Capture Pro is installed on a Windows or Mac computer.
• Select Server Mode if Document Capture Pro is installed on a Windows Server computer. Enter
the server address.
6. Click OK.
Parent topic: Scanning with Document Capture or Document Capture Pro
Scanning with Document Capture Pro in Simple View
You can use Document Capture Pro in Simple View to quickly select options and scan.
Note: The settings may vary, depending on the software version you are using. See the help information
in Document Capture Pro for details.
1. Load your original in the product.
2. Do one of the following to start Document Capture Pro:
• Windows 10: Click and select Epson Software > Document Capture Pro.
• Windows 8.x: Navigate to the Apps screen and select Document Capture Pro.
• Windows (other versions): Click or Start, and select All Programs or Programs. Select
Epson Software > Document Capture Pro.