Epson ET-8700 - Network Interface Specifications

345
USB memory device 2TB
Formatted in FAT, FAT32, or exFAT
Note: Epson cannot guarantee the operation of externally connected devices.
Parent topic: Technical Specifications
Network Interface Specifications
Wi-Fi
Standard IEEE 802.11 b/g/n; complies with either IEEE 802.11 b/g or IEEE
802.11 b/g/n, depending on purchase location
Security WPA2-PSK (AES); complies with WPA2 standards with support for
WPA/WPA2 Personal
WEP (64/128 bit)
Frequency band 2.4 GHz
Maximum radio-frequency
power transmitted
19.8 dBm (EIRP)
Communication mode Infrastructure mode
Wi-Fi Direct (Simple AP)
Note: Wi-Fi Direct Simple AP mode available even if you connect
the product to an Ethernet network.
Ethernet
Standard IEEE802.3i (10BASE-T)*
IEEE802.3u (100BASE-TX)
IEEE802.3AB (1000BASE-T)*
IEEE802.3az (Energy Efficient Ethernet); the connected device
should be IEEE802.3az compliant
Communication mode Auto, 10Mbps Full duplex, 10Mbps Half duplex, 100Mbps Full
duplex, 100Mbps Half duplex