Functions using Button Combination
+
Print Nozzle Check Pattern
Turn the printer on while holding down the
y
button to print the nozzle check pattern.
The total number of pages fed through the printer is also printed as well as the nozzle check
pattern.
Lights and Printer Status
When an error occurs, the light turns on or ashes. Details of the error are displayed on the computer screen.
: On
: Flashing
Light Situation Solutions
Initial ink charging may not be complete. See the Start Here poster to complete initial ink
charging.
Ink relling may not be complete.
Rell the ink inside the ink tank, and then press the
H
button to return the tank to the home position.
Ink tank cap is not fully closed.
Push in the cap rmly, and then press the
H
button.
No paper is loaded or more than one sheet
has been fed at a time.
Load paper and press the
button.
A paper jam has occurred.
Remove the paper and press the
button.
Protective material may be inside the printer. Open the printer cover, remove the protective
material, and then press the
button.
User's Guide
Printer Basics
12
To Next Page
Loading...
Need help?
General