Epson ET-M1100 Series - Solving Problems; Checking the Printer Status; Lights and Printer Status

Solving Problems
Checking the Printer Status
Lights and Printer Status
When an error occurs, the light turns on or
ashes.
Details of the error are displayed on the computer screen.
: On
: Flashing
Light Situation Solutions
Initial ink charging may not be complete. See the Start Here poster to complete initial ink
charging.
Ink relling may not be complete.
Rell the ink inside the ink tank, and then press the
H
button to return the tank to the home position.
Ink tank cap is not fully closed.
Push in the cap rmly, and then press the
H button.
No paper is loaded or more than one sheet
has been fed at a time.
Load paper and press the
button.
A paper jam has occurred.
Remove the paper and press the
button.
Protective material may be inside the printer. Open the printer cover, remove the protective
material, and then press the
button.
User's Guide
Solving Problems
67