EasyManuals Logo

Epson EX3200 User Manual

Epson EX3200
126 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #87 background imageLoading...
Page #87 background image
Maintaining the Projector 87
You may also need to replace the lamp if the Lamp light flashes
red. See page 95.
Contact your dealer or call Epson at 800-GO-EPSON
(800-463-7766). Request part number V13H010L58.
Follow these steps to replace the lamp:
1. Turn off the projector and unplug the power cord.
2. Let the projector cool for at least an hour (if it has been on). The
lamp is extremely hot immediately after use.
3. Loosen the lamp cover screw (you cannot remove it). Then slide
the lamp cover off.
Lamp
light
warning
Let the lamp cool fully
before replacing it.
In the unlikely event that
the lamp has broken, small
glass fragments may be
present and should be
removed carefully to avoid
injury. If the projector has
been installed on the ceiling,
you should stand to the side
of the lamp cover, not
underneath it.
If the lamp is used after the
replacement period has
passed, the possibility that
the lamp may break
increases. When a lamp
replacement message
appears, replace the lamp
with a new one as soon as
possible, even if it is still
working.

Table of Contents

Other manuals for Epson EX3200

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EX3200 and is the answer not in the manual?

Epson EX3200 Specifications

Projection Specifications IconProjection Specifications
pixel number480, 000 dots (800 x 600) x 3
white light output2600 lumens
color light output2600 lumens
aspect ratio4:3
native resolution800 x 600 (SVGA)
contrast ratioUp to 2000:1
color reproduction16.77 million colors
lamp type200 W UHE
lamp life in ECO ModeUp to 5000 hours
lamp life in Normal ModeUp to 4000 hours
throw ratio range1.45 – 1.96
size projected distance30" – 350" (0.76 – 8.90 m)
keystone correction vertical± 30 degrees
Lens Specifications IconLens Specifications
f-number1.44
focal length16.6 mm
zoom ratioDigital zoom 1.0 – 1.3
Power and Noise IconPower and Noise
power supply voltage100 – 240 V ±10%, 50/60 Hz
power consumption280 W
power consumption power off0.3 W
fan noise normal mode37 dB
fan noise ECO mode29 dB
Operating Environment IconOperating Environment
operating temperature41 ˚ to 95 ˚F (5 ˚ to 35 ˚C)
operating angle right/left± 30 degrees
operating angle upper/lower± 15 degrees
operating distance19' (6 m)
Dimensions and Weight IconDimensions and Weight
dimensions including feet11.6" x 9.0" x 3.1"
dimensions excluding feet11.6" x 9.0" x 3.0"
weight5.1 lb/2.3 kg

Related product manuals