Maintaining the Projector 91
3. Install two AA alkaline batteries, inserting the + and – ends as
shown.
4. Replace the battery cover and press it down until it clicks into
place.
Transporting the Projector
The projector contains many glass and precision parts. When
hand-carrying the projector, use a carrying case (included with the
EX3200/EX5200/EX7200 only).
Follow these guidelines to prevent damage when transporting it:
■ Close the A/V Mute slide (lens cover).
■ If a USB device is connected, remove it from the projector.
■ Return the projector feet to their stored (highest) positions.
■ When shipping the projector for repairs, use the original
packaging material if possible. If you do not have the original
packaging, use equivalent materials, placing plenty of cushioning
around the projector.
■ When transporting the projector a long distance, first place it in a
hard-shell shipping case, then pack it in a firm box with
cushioning around the case.
note
Epson shall not be liable for
any damages incurred
during transportation.
To Next Page
Loading...
