Epson Expression 10000XL
8 - Epson Expression 10000XL 5/04
3. Click the
Events tab. You see this window.
4. Make sure the
Start Button is selected in the Select an event
box.
5. Click
Start this program, select a program from the list,
and then click
OK.
Note: If the program you want to use is not listed, open it
and then follow these steps again. If it is still not listed, it
cannot be opened using the
a Start button.
You can disable the
a Start button by clicking the Take no
action checkbox on the Events tab.
Windows Me, Windows 2000, and Windows 98
For all Windows users except XP, follow these steps to set up
the a Start button:
1. Double-click the
Scanners and Cameras icon in the
Windows Control Panel.
2. Select
Epson
Expression
10000XL
and
click the
Properties
button.
3. Click the
Events tab. You see this window.
4. Make sure
Start Button appears in the Scanner events box,
then deselect any applications you don’t want to use in the
Send to this application list. Leave checked only the
application(s) you want to assign to the a Start button.
5. Click
Apply, then click OK to close the Epson Expression
10000XL Properties window, then click
OK again to close
the Scanners and Cameras Properties window.
Note: You can disable the a Start button by clicking the Disable
device events checkbox on the Events tab.
Related Documentation
CPD-18060 Epson Expression 10000XL Start Here
sheet
CPD-18061 Epson Expression 10000XL User’s Guide
CPD-18062 Scanner Software CD-ROM (includes
HTML Reference Guide)