128
You see a screen like this:
5. Change any of the displayed settings on the Scan tab as necessary.
6. Select the Advanced Settings tab to view and change additional scan settings, if necessary.
7. On the Scan tab, press the start button to start scanning.
Your product scans your original and saves the scanned file to the selected destination.
Parent topic: Starting a Scan Using the Product Control Panel
Related references
Control Panel Scanning Options
Related tasks
Setting Up Epson Connect Services
Using Epson Scan to Cloud
Setting Up a WSD Port (Windows 7/Windows Vista)
You can scan to a networked Windows computer using WSD (Web Services for Devices). You must first
set up a WSD port on your Windows 7 or Windows Vista system (the port is set up automatically on
Windows 10 and Windows 8.x).
Before you set up a WSD port, make sure you installed your product software, and connected your
product and computer to the same network.
1. Turn on your product.
To Next Page
Loading...
