Epson H6000II - TM Two-color Thermal Line

TM-H6000II with Image Scanner User’s Manual 13
English
Note:
Do not use any liquid, such as alcohol, benzine, or water.
glass part
TM-H6000II Specifications
Print method Receipt: Thermal line, 180 dpi
×
180 dpi
Slip: 9-pin serial impact dot matrix
Endorsement: 8-pin shuttle impact dot matrix
(dpi: dots per inch [number of dots per 25.4 mm {1"}])
Print font Receipt: 12
× 24/9 × 17
Slip: 5
×
9/7
×
9
Endorsement: 5 × 7
Columns Receipt (Standard): 42/56
Slip: 45/60
Endorsement: 40
Character size
(W
×
××
×
H)
Receipt: 1.41
× 3.39 mm {0.06 × 0.13"}
0.99
× 2.40 mm {0.04 × 0.09"}
Slip: 1.56
× 3.1 mm {0.06 × 0.12"}
1.24 × 3.1 mm {0.05 × 0.12"}
Endorsement: 1.1
× 2.42 mm {0.04 × 0.10"}
Character sets 95 alphanumeric, 37 international characters
128
× 11 (slip: 12) graphic
Print speed Receipt:
Normal: Max.: 170 mm/s {approx. 6.7"}
Ladder bar code/2-dimensional code printing:
Max.: 114 mm/s {approx. 4.5"}
Two-color printing: Maximum: 75 mm/s {approx. 3.0"}
Slip: Approx. 5.14 lps
Endorsement: Approx. 1.9 lps
(lps: lines per second)
Paper dimensions Receipt: Thermal roll paper 79.5 ± 0.5
× 83 mm {3.13 ± 0.02 × 3.27"}
Slip/endorsement: 68 ~ 230
× 68 ~ 297 mm {2.7 ~ 9.1 × 2.7 ~ 11.7"} (W × L)
Note: the minimum size is 68 × 152 mm {2.7 ~ 6.0"}
Paper thickness Slip (single-ply): 0.09 ~ 0.2 mm {0.0035 ~ 0.0079"}
Endorsement: 0.09 ~ 0.2 mm {0.0035 ~ 0.0079"}
Copy capability Receipt/Endorsement: Single-ply
Slip: 1 original + 3 copies
Thermal paper type Monochrome: NTP080-80, Two-color: ENTPB080080
Inked ribbon Slip: ERC-32(P), (B) Endorsement: ERC-41(P), (B)