Need help?Do you have a question about the Epson TM-H6000III Series and is the answer not in the manual?
General| Print Width | 80 mm |
|---|---|
| Resolution | 180 x 180 dpi |
| Print Method | Dot Matrix |
| Print Speed | 300 mm/sec (high speed mode), 150 mm/sec (high quality mode) |
| Interface | USB, Serial, Parallel |
| Paper Width | 58 mm, 80 mm |
| Power Supply | AC 100-240V |
| Cash Drawer | 2 |
| Paper Thickness | 0.06 - 0.1 mm |
| Noise Level | 55 dB |
Provides information on firmware version references, directing users to release notes.
Details recommended DIP switch settings for Serial, Parallel, USB, and Ethernet ports for proper printer configuration.
Specifies port information for serial, parallel, USB, and Ethernet interfaces, including default and settable ranges.
Lists device-specific settings configurable via the SetupPOS utility, categorized by function tabs.
Explains printer property set values and default configurations, including capability set values and list properties.
Lists capability names and their corresponding set values for Receipt/Slip and Slip Endorsement modes.
Details list properties like CharacterSetList, JrnLineCharsList, RecLineCharsList, and rotation lists.
Describes width and height properties for various print elements like line spacing, line height, and line width.
Provides device names and descriptions based on the interface (Serial, Parallel, USB, Ethernet).
Details PageModeArea and PageModeDescriptor properties for Receipt, Slip, and Slip (Validation/Endorse) stations.
Lists supported and unsupported methods for printer operations, detailing compatibility with PageMode printing.
Details supported and unsupported escape sequences for various printing modes and their PageMode compatibility.
Lists the barcode types supported by the TM-H6000III printer.
Explains the support status for Power Condition Reports (Powered on/off).
Describes support for Process ID for Synchronous Processing and benefits of Asynchronous output.
Details support for setting printing positions, including left margin and general printing position.
Explains the electronic logo function using NVRAM via TMFlogo Utility or SetBitmap Method, and available NVRAM size.
Lists allowance ranges for Download, Raster, Color, and NV bitmaps.
Details support for color bitmap printing, including 16/256-color support and halftone method settings.
Details the maintenance counter function for operation logs, listing available counters and their types.
Explains the automatic recovery function when power is restored after an interruption.
Explains output without flow control on USB/Ethernet interfaces, noting firmware version differences.
Details how the Slip LED blinks when BeginInsertion is executed, configurable via SetupPOS utility.
Explains how to confirm and use the validation print function using DirectIO method and related parameters.
Details the emphasized printing function for 90-degree rotated printing mode at the slip station.
Describes essential precautions for using the TM-H6000III, including hardware limitations and printing restrictions.
To Next Page