Version 3.00 Feb. 2019
14
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-H6000III)
3.2 Methods
The following explanation is about supported/unsupported Methods, and the
detailed information.
Method Supported/Unsupported Compatibility with the
PageMode printing
PrintNormal
O O
PrintTwoNormal X X
PrintImmediate
O O
*2
PrintBarCode
O O
*3
PrintBitmap
O O
*4
PrintMemoryBitmap
O O
*4
CutPaper
O (1~100: One point remains
uncut)
X
MarkFeed X X
ChangePrintSide
O/ X
*1
X
ValidateData
O O
TransactionPrint
O O
SetLogo
O O
SetBitmap
O O
RotatePrint
O
X
EndRemoval
O O
BeginRemoval
O O
EndInsertion
O O
BeginInsertion
O O
ClearPrintArea
O O
PageModePrint
O O
DrawRuledLine X X
O : Supported
X : Unsupported
*1
Not available with multilingual character models and validation models.
*2
If the specified Station is ready to print, the printing data shall not be stored in the
PageMode printing buffer but, instead, go straight to printing. If the Station is not
ready to print, an error is returned.
*3
If other than “LEFT” is specified for the printing position of barcode, the printing shall
be done, regardless of the PageModeHorizontalPosition property setting, based on the
PageModePrintArea property setting in the horizontal direction.
*4
If other than “LEFT” is specified for the printing position of bitmap, the printing shall
be done, regardless of the PageModeHorizontalPosition property setting, based on the
PageModePrintArea property setting in the horizontal direction.