Epson TM-H6000III Series - 3.1.2 List Properties

Version 3.00 Feb. 2019
10
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-H6000III)
3.1.2 List Properties
The List Properties are explained in the following.
List Property Settings
CharacterSetList “254, 255, 437, 850, 852, 858, 860, 863,
865, 866, 998, 999, 1252”
*1 *2
JrnLineCharsList “”
RecLineCharsList (Font A) “42” <Default>
(Font B) “56”
SlpLineCharsList
(Validation)
(Font A) “45” <Default>
(Font B) “60”
SlpLineCharsList
(Endorsement)
“40”
RecBarCodeRotationList “0, R90, L90, 180”
RecBitmapRotationList “0, R90, L90, 180”
SlpBarCodeRotationList “0, 180”
SlpBitmapRotationList “0, R90, L90, 180”
SlpBarCodeRotationList
(Validation)
“0, 180”
SlpBitmapRotationList
(Validation)
“0, R90, L90, 180”
SlpBitmapRotationList
(Endorsement)
“0, 180”
FontTypefaceList “”
*1
If Multilingual character model, “936” or “950” is added to the list.
*2
When the CapCharacterSet property is set to "PTR_CCS_UNICODE," "997" is added to
the list.When CharacterSet is set to "997," all characters loaded in the device are
allocated to Unicode for printing. However, the BinaryConversion property should be set
to "OPOS_BC_NONE" when printing with Unicode.