Version 3.00 Feb. 2019
iii
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-H6000III)
Contents
SECTION 1. INTRODUCTION.......................................................................................1
SECTION 2. DETAILS ON SETTINGS..........................................................................2
2.1 References of Firmware Versions ............................................................................2
2.2 Settings of DIP Switches .......................................................................................... 2
2.3 Port Information ....................................................................................................... 4
2.4 Device
Settings .........................................................................................................7
2.4.1 Usable Device Specific Settings......................................................................... 7
SECTION 3. FUNCTION DETAILS ...............................................................................8
3.1 Property Set Values and Default Values.................................................................8
3.1.1 Capability Set Values.........................................................................................8
3.1.2 List Properties..................................................................................................10
3.1.3 Width and Height Properties ..........................................................................11
3.1.4 Common Property Strings ............................................................................... 12
3.1.5 PageMode Print Properties.............................................................................. 13
3.2 Methods...................................................................................................................14
3.3 Escape Sequences ................................................................................................... 15
3.4 Printable Barcode Type .......................................................................................... 16
3.5 Power Condit
ion Reports........................................................................................ 16
3.6 Synchronous Processing ......................................................................................... 17
3.7 Printing Positions ...................................................................................................17
3.8 Electronic Logo Function (NVRAM) ...................................................................... 18
3.9 Printable bitmap
types and sizes........................................................................... 19
3.10 Color Bitmap Printing .......................................................................................... 19
3.11 Maintenance Counter ........................................................................................... 20
3.12 Automatic Recovery Function .............................................................................. 21
3.13 Output without Flow Control on the USB/ Ethernet Interfaces ........................ 21
3.14 LED Blinking when BeginInsertion is executed................................................. 21
3.15 Validation Printing............................................................................................... 21
3.16 Emphasized Printing Function for 90-degree Rotated Printing Mode at Slip
Station........................................................................................................................... 22
SECTION 4. WARNINGS..............................................................................................23
To Next Page
Loading...
