6 TM-H6000II with Image Scanner User’s Manual
English
Power Switch Cover
You can use the
enclosed power switch
cover to make sure that
the power switch is not
accidentally pressed.
Just press the cover into
place to install it.
WARNING:
If an accident occurs
when the power switch cover is attached, immediately unplug the
power supply cable to avoid fire.
Installing the Roll Paper
Note:
Do not use paper rolls that have the paper glued or taped to the core
because they might cause a paper jam.
To prevent paper jams, make sure that nothing obstructs paper coming
out of the paper exit, and do not pull the paper out of the printer.
To Next Page
Loading...
Need help?
General