Epson Home Cinema 3200 User Manual

108
Note: Unplug any charging cables from the glasses before cleaning them.
Caution: Do not use paper towels or any other abrasive materials to clean the glasses.
Parent topic: Projector Maintenance
Air Filter and Vent Maintenance
Regular filter maintenance is important to maintaining your projector. Your Epson projector is designed
with an easily accessible, user-replaceable filter to protect your projector and make regular maintenance
simple. Filter maintenance intervals will depend on the environment.
If regular maintenance is not performed, your Epson projector will notify you when the temperature
inside the projector has reached a high level. Do not wait until this warning appears to maintain your
projector filter as prolonged exposure to high temperatures may reduce the life of your projector or lamp.
Damage due to the failure to properly maintain the projector or its filter may not be covered by the
projector or lamp Limited Warranties.
Cleaning the Air Filter
Replacing the Air Filter
Parent topic: Projector Maintenance
Related references
Projector Light Status
Cleaning the Air Filter
You need to clean the projector's air filter in the following situations:
• The filter or vents get dusty.

Epson Home Cinema 3200 Specifications

General

Contrast Ratio	40, 000:1
Projection Technology	3LCD
Lens Shift	Vertical: ±60%, Horizontal: ±24%
Keystone Correction	Vertical: ±30 degrees, Horizontal: ±30 degrees
Throw Ratio	1.32 - 2.15
Zoom Ratio	1.6x
Color Processing	10-bit
3D	Yes
Warranty	2 years limited warranty
Resolution	1920 x 1080
Lamp Life	5000 hours (Normal)
Connectivity	2x HDMI
HDR Support	Yes
Projection Size	40" - 300"
Noise Level	24 dB (Eco)
Wireless Connectivity	Optional
Supported 3D Formats	Frame Packing, Side by Side, Top and Bottom
Brightness	2900 Lumens (White), 2900 Lumens (Color)